LITZEE Flood Barrier Threshold Bar Internal Door Seal Collapsible Shower Strip Bathtub Screen For Wet And Dry Separation Suitable For Kitchen And Bathroom (100cm, White)

• Foldable and waterproof: the sealing strip; The self-adhesive dam is placed tightly to prevent water from escaping. It is waterproof and foldable. It can be flexibly bent according to the shape of your furniture to form a small waterproof dam, providing a good water blocking effect. The shower grate has a white look, which fits perfectly into your bathroom. surrounding environment
• Advanced materials: the shower threshold dam is made Made of high-quality TPE, healthy, environmentally friendly, waterproof, durable heat resistant and dimensionally stable. Separate dry and wet. You can easily cut it to size. desired length, and the water retention tape is flexible enough to make various shapes.
• Soft and harmless: The waterproof belt is soft and not he will win. Don’t hurt your feet, so hitting it can ensure your safety. and that of your family. The surface is easy to clean. clean, just wipe with a damp cloth, like new.
• Easy to clean. To install: 1. Wipe floor clean. 2. Highlight the location. 3. Remove the primer and paste the water retention strip according to the marked position. 4. Replace the water lock lever. 5. Pull out the water retention strips at both ends and stick them on both sides 6. Leave to rest for 24 hours.
• Function of use: the waterstop has the ability to stop water and is suitable for bathrooms, kitchens and sinks. Waterproof and dustproof, forming a dry and wet separation protection, to ensure that the floor is dry and clean; in this way, while ensuring the safety of your family, it can also be used under a smooth wooden or glass door

Shower seal
-Easy to install cut: create different shapes to fit your bathtub or kitchen sink.
-Very suitable for showers without curves and other areas that must contain water: under the shower curtain, side of the shower tray, bathroom thresholds, sinks; laying, machines for; washing, sinks.
Specification:
Color: white, black, gray, transparent
Material: TPE
Length: 100cm
Installation steps:
* First, clean the floor thoroughly and keep it dry. This step is very important!
*Next, determine the installation position of the water retention strip, and then mark it on the floor with a pen.
* Remove the adhesive tape on the back of the water retention strip and stick it ground according to the position marked above.
* Finally, in order to avoid falling, dry it within 24 hours to avoid contact with water.
Note: Please clean the surface thoroughly and make sure it is dry before installation and remove all existing water shut-offs. Please use a hair dryer to heat the glue before use to achieve better adhesion.[Special reminder] The water containment belt can be used with the glue for; glass. Apply glue to both sides of the waterproof barrier and spread it evenly. If both sides and both ends are fixed with glass adhesive glue, it can extend its service life.